Water-washable UV resin | Compatible with 365–405 nm MSLA/LCD printers | Translucent blue finish for detailed prints | Rinse clean with water — no harsh solvents needed
The ANYCUBIC Water Wash Resin 2.0 Translucent Blue is designed for MSLA/LCD resin printers and makers who want high-detail results without the hassle of solvent-based cleaning. Its hydrophilic group-modified formulation means printed parts can be rinsed clean with plain water (≥5 minutes), cutting out the need for isopropyl alcohol in the wash stage. Compatible with 365–405 nm UV light sources, it suits a wide range of consumer resin printers. Once washed, a 3-minute post-cure at 405 nm locks in the mechanical properties — tensile strength of 38–43 MPa and hardness of 82–85 HD — delivering finished parts that are firm, dimensionally stable, and transparent blue colour. Best printed at an ambient temperature of 20–40 °C for consistent layer adhesion and reliable results.
Features
- Water-washable formula — rinse printed parts with water (≥5 min), no IPA required during washing
- Compatible with 365–405 nm MSLA/LCD resin printers
- Translucent blue transparency for display models, miniatures, and detail-focused prints
- Cured hardness of 82–85 HD with tensile strength of 38–43 MPa
- Low volume shrinkage rate of 2.2–5.5% for dimensionally accurate output
- Post-cure in 3 minutes at 405 nm UV (25,000–30,000 µW/cm²)
- Post-cured resin disposable as standard plastic waste
Specifications
- Colour: Translucent Blue (#077CAB)
- Resin Size: 1kg
- Pre-print preparation: Shake well before use
- Print environment: 20-40 ℃
- First layer exposure duration: 25-40 s
- Normal exposure duration: 2-2.5 s
- Print temperature: 20-50 ℃
- Material: Hydrophilic group-modified light-curing resin
- Wavelength: 365-405 nm
- Viscosity: 190-230/mPa·s(25℃)
- Density: 1.07-1.09/g/cm³
- Hardness: 82-85 HD
- Tensile Strength: 38-43 MPa
- Elongation at Break: 16-22%
- Bending Modulus: 48-60 MPa
- Bending Strength: 2300-3000 MPa
- Young’s Modulus: 1100-1300 MPa
- Izod Impact Strength: 133 J/m
- Volume Shrinkage Rate: 2.2-5.5%
- Cleaning: 95% IPA
- Washing duration: ≥3 mins
- UV Wavelength: 405 nm
- Curing Temperature: 18-30 ℃
- UV Intensity: 25000-30000 uW/cm²
- Curing time: 3 mins
- Disposal: Post-UV-curing resin is treated as plastic waste
- Cleaning: Water
- Washing duration: Medium ≥5 min
- UV Wavelength: 405 nm
- Curing Temperature: 18-30 ℃
- UV Intensity: 25000-30000 uW/cm²
- Curing time: 3 mins
- Disposal:
- 1. Do not drain wastewater into sewers to avoid contaminating groundwater.
- 2. After cleaning, let the wastewater sit in the tank for a period of time.
- 3. Place it under sunlight to allow the resin in the tank to fully cure.
- 4. Once cured, dispose of it as solid plastic waste for recycling to prevent environmental pollution.
What’s in the Box
- Anycubic Water Wash Resin 2.0 – Translucent Blue x1
