Enhanced toughness over standard PLA | Smooth, consistent extrusion | Eco-friendly plant-based material | Compatible with all 1.75 mm FDM printers | Beginner-friendly printing parameters
The Anycubic PLA+ Filament is a high-toughness 3D printing material suited to hobbyists, educators, and makers who want better structural results than standard PLA without added complexity. Formulated from premium raw materials, it delivers twice the toughness of ordinary PLA with a bending modulus of 3980±360 MPa, making it well suited to toys, decorative parts, and functional prints that need to withstand handling. A tight diameter tolerance of less than ±0.02 mm ensures consistent, even extrusion that minimises nozzle clogging and produces clean, smooth surfaces. Because it shares standard PLA printing parameters — nozzle temperatures of 190–230 °C, a heated bed of 55–65 °C, and print speeds of 50–200 mm/s — you can load a new spool and get reliable results straight away. Refined from an eco-friendly plant-based substance, it produces lower odour during printing and does not emit irritating fumes, keeping your workspace comfortable. Each 1 kg spool features a reusable design with a threaded connection system that reduces filament entanglement and tangling errors.
Features
- Enhanced toughness with a bending modulus of 3980±360 MPa — approximately twice that of standard PLA — for more impact-resistant, durable prints
- Tight diameter tolerance of less than ±0.02 mm for consistent extrusion and reduced nozzle clogging
- Compatible with all 1.75 mm FDM printers; no special settings required
- Eco-friendly plant-based material with lower odour and no irritating emissions during printing
- Reusable spool with threaded connection system to minimise filament entanglement and operational errors
- Supports intelligent identification chips for automatic filament recognition on compatible Anycubic printers (e.g. ACE Pro)
- Recommended for toys, decorative parts, and fandom or creative projects
Specifications
- Colour: Grey (#B1B3B3)
- Dry Out Before Use: Recommended
- Drying Condition: 45-50℃, 6-8h
- ACE Compatibility: Compatible
- Nozzle Size: Recommended 0.2 mm or above
- Printing Temperature: 190-230 ℃
- Heated Bed Temperature: 55-65 ℃
- Recommended Printing Speed: 50-200 mm/s
- Cooling Time: 9 s
- Maximum Volume Speed (Flow Rate): 12 mm³/s
- Density: 1.21 g/cm³
- Melt Index: 4~10 g/10 min (190℃/2.16kg)
- Melting Point Temperature: 162 ℃
- Heat Deflection Temperature (0.45MPa): 50 ℃
- Young's Modulus: 2790±250 MPa
- Tensile Strength: 45±5 MPa
- Elongation at Break: 12±1%
- Bending Modulus: 3980±360 MPa
- Bending Strength: 82±8 MPa
- lzod lmpact Strength (X-Y): 28±1 kJ/m²
- Tensile Strength (Z): 23.8±0.4 MPa
- Filament Type: General filaments
- Recommend to Print: Toys, decorative parts, and fandom
- Intelligent Identification: Supported
- Reusable Filament Spool: Supported
What's in the Box
- Anycubic PLA+ Filament 1kg - Grey x1
